Tight access crane hire · Sydney + Central Coast
Tight access crane hire — when there’s no room for a normal crane.
Narrow driveways, backyards, laneways, indoors — tight access crane hire is specialist crane hire for sites where a standard crane simply can’t fit, set up or reach. Parramatta Cranes solves these lifts with compact mini and spider cranes, careful lift planning and ticketed operators across Sydney and the Central Coast, 24/7. Most crane problems aren’t about weight — they’re about access. Send us photos of your access and we’ll tell you exactly how we’d do it.
- Access from 750 mm
- Free access assessment
- Operator included · 24/7
What counts as a “tight access” site?
If any of these sound like your job, you need tight access crane hire rather than a standard crane:
Gaps under a metre down the side of a house, through gates or between buildings.
Rear yards, battle-axe blocks and laneway sites a crane truck can’t reach.
Streets where a full-size boom can’t safely operate under the lines.
Internal lifts, plant rooms and below-ground levels with height and space limits.
Lifts on structures with floor-load limits that rule out heavy machines.
Lawns, sand and slopes where a wheeled crane would sink or slip.
How we solve a tight access lift
The machine is only half of it — the planning is what keeps your job on time and on budget:
We review access, ground, obstacles and the load from your photos or a free site visit.
Lift plan, machine choice and rigging set before the day, with full safety checks (SWMS).
The right Maeda for the access — plus a tracked carrier if the load has to travel in.
Ticketed operators, riggers and dogmen carry out the lift with minimal disruption.
Don’t book the wrong crane. Access problems are one of the most common causes of delays and rebooking fees on Sydney sites. A little planning avoids them — read common crane access issues and what happens when the wrong crane is booked, then send us your site details and we’ll get it right first time.
The equipment we use for tight access
- Spider cranes — outrigger legs for stability in confined, uneven spaces
- Mini crawler cranes — Maeda 285 + 305 for soft ground and heavier lifts
- Tracked carrier — moves steel and materials through the tightest access
- Glass lifter — safe vacuum handling for glazing in restricted spots
- Steel beam lifting — structural steel placed on difficult sites
Not sure which machine your access calls for? Start with the mini crane hire hub.
Frequently asked questions
What is tight access crane hire?
How narrow an access can you get a crane through?
Do you assess the site before the job?
What if a mobile crane can’t get into my site?
How much does tight access crane hire cost?
Servicing all of Sydney + the Central Coast
Based in Rydalmere with a Central Coast base at The Entrance, we reach tight-access sites right across the region — fast. See areas we service.
Think your site is too tight? Send us a photo. We’ll tell you honestly whether we can do it, and how. Open 24/7.